The ClearO2 unit is available with a power supply of 220V-240V (T200) and CE and W3 certified. The ClearO2 T100 unit is designed to serve the needs of a single welder, who needs to change their work-place. The moment the torch is out of the specially designed torch holder option, the machine automatically starts working. The automatic Start/Stop function to preserve energy and to synchronize the unit with the 8TE TIG Extractor is a standard on the ClearO2 units. A manual cleaning function can be done by pressing a single button. The moment the under pressure in the filter is too high, the unit starts to clean the filter automatically. The ClearO2 T100 unit has an automatic cleaning function by reverse compressed air pulse. The compact unit is perfect for changing location on the job due to its lightweight – only 30 kg – and its four wheels with two lockable. ![]() With the combination of the 8TE TIG Extractor range of welding fume torch and ClearO2 T100 unit we capture between 90% and 95% of welding fume at the source and filter these with efficiency > IFA 99.8%. The ClearO2 T100 is designed to accompany the 8TE TIG Extractor from Translas. The ClearO2 unit is available with a power supply of 220V-240V (T100) and CSA and CE certified. For this reason, Translas, a Dutch welding gun manufacturer, developed fume welding guns – 8XR Cobot, 8XE MIG, and 8TE TIG fume Extractors – that extract the welding fumes directly at the source up to 98%. It’s no secret that certain gases, such as helium, carbon dioxide, and argon displace oxygen and argon specifically, posing a suffocation risk in enclosed work areas. The exposure that lasts for a short period of time can cause nausea, dizziness, or irritation of the eyes, nose, and throat.Īs a result of prolonged exposure, one is exposed to ultra-fine metal dust that can cause cancer of the lung, permanent damage to the brain, and kidney failure. When welding, the gas and vapours released during the process can cause serious health problems. A mixture’s composition will vary depending on the welding method and the products that will be welded together. When the welding cable is placed in a slit on top of the unit the automatic start/stop function can be used and the unit will automatically switch on when welding starts and off when welding stops.The welding fume extraction system contain vapours and fine particles which are a mixture of airborne gas by-products and vapour by-products. At low welding fume concentrations, the extraction capacity can be halved, in which situation both motors operate at half speed, thus providing a lower noise level and reduced maintenance. The two motors guarantee an adequate extraction capacity under all conditions. It is also possible to add hoses on the exhaust side to completely remove the filtered air from the area if required. If required an optional activated carbon filter can be placed on top of the main filter to remove smell. The last stage is a High Efficiency Particle Arrestor HEPA 12 which guarantees a filtration efficiency of 99.9% under all circumstances. The large area of the main filter provides a long life and a constant high efficiency since filter cleaning does not have to take place very frequently. When the welding fumes enter the unit they first pass a metal pre-separator, then the fumes flow through a aluminium pre-filter and into the main filter which has a total area of 12m2.
0 Comments
Leave a Reply. |